Svanz International Private Limited

Executive table in completely knock down conditions with an overall size 1600mm X 1600mm X 750mm that is to be assembled at site. The worktop shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS powder coated rectangle pipe frame having cross-section area 40mm X 20mm. The table shall be clad with 1mm thick modesty panel which provide structural support for the table. It should be 1mm thick with star perforation CRCA powder coated sheet in linear shape. The understructure shall consist of loop leg and C leg made up of MS powder coated triangular shape pipe having cross-section area 53mm X 53mm X 75mm. There shall be shoe provided to avoid scratches on the floor. Side top shall be provided with an overall size 800mm X 500mm X 750mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. It shall be supported on peg which is mounted over side storage unit. The side storage having an overall size 1400mm X 570mm X 500mm. It should be made up of particle board with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 box drawer, 1 filing drawer and 1 door shutter. The drawer shall be operated with roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The shutter shall be operated by handle and concealed crank hinge. Side storage unit shall be mounted on CRCA powder coated U shape leg having cross-section area 53mm X 53mm x 75mm. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

executive table with credenza unit in completely knock down conditions with an overall size 1800mm X 1800mm X 750mm that is to be assembled at site. The worktop shall have the size 1500mm X 900mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20m with 1.6mm thick duly powder coated. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding. The table understructure shall consist of CRCA rectangle pipe leg (loop leg) and (U-type leg) having cross-section area 40mm X 10mm and 95mm X 25mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1800mm X 580mm X 430mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 3 drawer and 1 sliding shutter which is operated on ball bearing channel to enable smooth operation, SS handle and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The credenza unit shall be mounted on CRCA rectangle pipe frame leg having cross-section area 40mm X 10mm with 1.5mm thick. The complete metal parts shall be duly powder coated to the thickness 50-60µ dry film thickness. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

We are engaged in offering Svanz Evoke 3 executive table to our clients. Our range of all products is widely appreciated by our clients.