Svanz International Private Limited

Fixed pedestal with an overall size 400mm X 600mm X 605mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick and drawer base shall be 9mm thick. The edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 0C. The pedestal shall have 3 nos. of drawer having same size 400mm X 167mm. The drawer shall be operated with Al die cast handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on 75mm SS peg. The manufacturershall have quality and safety assurance like  ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

mobile pedestal with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and shade. Pedestal side, back, facia shall be 18mm thick and drawer base shall be 9mm thick and the edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with Al die cast handles and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

placing a mobile pedestal with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick and drawer base shall be 9mm thick. The edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 0C. The pedestal shall have 3 nos. of drawer having same size 400mm X 197mm. The drawer shall be operated with Al die cast handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturershall have quality and safety assurance like  ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

mobile pedestal with an overall size 400mm X 560mm X 540mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick, top 25mm thick and drawer base shall be 9mm thick. The top of the pedestal shall be full round post form at front side and other edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 0C. The pedestal shall have 2 nos. of drawer i.e. 1 normal drawer having size 400mm X 150mm and 1 filing drawer having size 400mm X 296mm. The drawer shall be operated with SS base C-handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturershall have quality and safety assurance like  ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

a mobile pedestal with an overall size 440mm X 580mm X 600mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick, top 25mm thick and drawer base shall be 9mm thick. The top of the pedestal shall be full round post form at front side and other edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 0C. The pedestal shall have 3 nos. of drawer. The drawers shall be operated with Al die cast handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturershall have quality and safety assurance like  ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

 overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick and drawer base shall be 9mm thick. The edges shall be sealed with appropriate thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 0C. The pedestal shall have 3 nos. of drawer i.e. 2 box drawers having size 400mm x 150mm and 1 filing drawer having size 400mm X 271mm. The drawer shall be operated with recessed handle and easily close & open with the assistance of 400mm roller base bottom channel having load capacity 20Kg and 400mm ball bearing base telescopic channel having load capacity 35Kg to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. The pedestal shall be mounted on injection moulded nylon castor. The manufacturershall have quality and safety assurance like  ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Supplying and placing fixed pedestal with an overall size 400mm X 450mm X 680mm. It shall be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Pedestal side, back, facia shall be 18mm thick and drawer base shall be 9mm thick. The edges shall be sealed with 2mm/0.8mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawers shall be operated with Al die cast handles and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided with an overall size 364mm X 50mm. There shall be buffers provided at the base to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Established as a Pvt.Limited Company firm in the year 2021 at Mohali (Punjab, India), we “Svanz International Private Limited” are a leading Wholesale Trader of a wide range of Office Chair and Office Table.